Sense+ Smart Wireless Switch
Control your lights your way with Nanoleaf’s innovative Sense+ Smart Wireless “Anywhere” Switch. Our exclusive Litewave technology allows you to control your Nanoleaf lights instantaneously without any hardwiring needed!
Put these smart wireless switches EVERYWHERE you want—like by your bedside or desk, in the kitchen, living room, hallway or bathroom for an extra point of control for your smart lights in addition to the Nanoleaf app, or your smart home ecosystem.
- Built-In Motion & Daylight Sensors
- Buttons to Turn Lights On/Off & Adjust Brightness
- 2 Programmable Side Buttons for Up to 6 Custom Actions
- Battery Powered (CR2477)
- For Nanoleaf Smart Lights Only* (See FAQ for more details)
- Matter Early Access available via Apple Home & SmartThings
Read More
Read Less
Pairs well with
Get a free replacement for defective products. LEARN MORE
Product Details
Dimensions
Mounting Plate Height: 115mm
Mounting Plate Width: 70mm
Mounting Plate Depth: 6mm
Wireless Switch Height: 66.5mm
Wireless Switch Width: 32.9mm
Wireless Switch Depth: 16mm
Weight
Mounting Plate: 27g
Wireless Switch: 33g
General
Buttons: On, Off, Increase Brightness, Decrease Brightness & 2 Configurable with Up to 6 Custom Actions
Mounting Type: Magnetic Mounting Plate with Adhesives (included), or screws
Portable: Yes
Communication Protocol:
Nanoleaf Litewave, Matter* over Thread, Bluetooth
* Matter Early Access
The Nanoleaf App: Configure Switch via Nanoleaf App (Android & iOS) for mobile/tablet or The Nanoleaf Desktop App (Windows & Mac)
Device Compatability: See User Manual for latest device compatibility
Battery Type: CR2477 Battery Included
Sensors:
Motion Sensor
Daylight Sensor
Sensor Type: Passive Infrared (PIR)
Sensor Detection Range: detection range 6-10 metres
Sensor Horizontal Field of View: horizontal detection angle 120 degrees
Sensor Vertical Field of View: Vertical detection angle 90 degrees
Use Environment
Battery Life: 1+ years
Operating Temperature Range: 0-45℃
Usage Scenario: Indoor
Warranty
Warranty: 2 Years
Control multiple lights (or devices) from a single switch. These customizable wireless switches add an extra point of control for your smart lights in addition to the Nanoleaf app, or your smart home ecosystem.
Mount it to the wall (no hardwiring required), place it on a magnetic surface, or use it as a portable remote control.
Configurable Side Buttons
Get easy access to your most-used features. Set up to 6 custom actions for quick one-touch access to your favourite colours and smart home routines (through Matter Early Access) without ever having to pull out your phone.
Key Features
Get fast and reliable control over all your Nanoleaf products* with Nanoleaf Litewave technology. Watch your lights change instantly the moment you click a button on the Sense+ switch.
Go hands-free. Have your lights turn ON/OFF automatically based on motion detected in the room.
Wireless Switch for convenient control anywhere, with no hard wiring required.
Use as a portable remote you can move around your home, or mount onto the wall to act like a more traditional light switch. No cutting, drilling, or wiring required.
Lights adjust based on surrounding ambient lighting conditions.
Have your lights turn on as it gets dark, or stay off when there's enough daylight in the room.
Set up one of the programmable side buttons to trigger multi-device routines to enhance your morning wake-ups, evening wind-downs, or any other moments where you crave a bit of smarter simplicity.
- Must be enabled within the Nanoleaf App.
- Requires a Matter compatible hub and Thread Border Router.
- Available on Apple Home, Amazon Alexa & SmartThings.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Please read our FAQs page to find out more.
FAQs
How do I install this switch?
The Sense+ Wireless Switch has a magnetic mounting plate that can be mounted onto a wall with adhesive tape (included) or screws. No hardwiring required!
What kind of battery does the switch use? How long does it last?
The Sense+ Wireless Switch includes a replaceable CR2477 Battery with a battery life of 1+ years.
What Nanoleaf products does the Sense+ Switch work with?
The Sense+ Smart Wireless Switch is compatible with most Nanoleaf Smart Lights*, with the exception of Original Nanoleaf Light Panels, Nanoleaf Canvas, and Smarter Partner products.
You can also connect some non-Nanoleaf devices to the Switch via Matter Early Access depending on the device and its compatibility with Matter and your smart home ecosystem.
*Support for Nanoleaf 4D is coming soon.
Can I turn off the motion/daylight sensors?
Yes! You can disable Sense+ (motion/daylight sensors) directly within the Nanoleaf App.
What is Nanoleaf Litewave?
It is a proprietary protocol that allows the switch to connect to all your Nanoleaf lights (regardless of whether those products are running on Thread, Bluetooth or Wi-Fi) in a more robust and reliable way, for seamless, instantaneous control.
What is Matter Early Access?
Matter Early Access allows you to use the switch to control or trigger other devices/routines in your smart home ecosystems.
To use Matter Early Access, you must:
1. Enable it within the Nanoleaf App
2. Have a Matter compatible hub
3. Have a Thread border router.
Note: Only the side buttons can be configured through Matter. Matter Early Access is currently available on Apple Home, Amazon Alexa & SmartThings.